大肉大捧一进一出好爽视色大师,丰满少妇被猛烈进入在线播放,欧美真人性野外做爰,黑人巨大vs日本人优在线

1. 概述
1.1 MNS系統為工廠組裝低壓開關裝置。技術標準符合IEC439-1、VDE660part500、BS5486part1、UTE63-410、GB7251.1 作為船用的產品還符合l1oyd，s Register 船用標準。
MNS系列低壓開關柜包括固定技術和抽屜技術。選用材料又分鋼板結構技術和塑料結構技術.后者技術水平達到當代國際水平。
MNS系統能適應各種供電配電的需要，能廣泛用于陸用、電站、核電站、船用、石油平臺等各種工礦企業配電系統。
1.2 產品特點
*設計緊湊:以較小的空間能容納較多的功能單元。
*結構通用性強、組裝靈活：以25mm為模數的C型型材能滿足各種結構型式，防護等級及使用環境的要求。
*彩用標準模塊設計：分別可組成保護、操作、轉換、控 制、調節、測定、指示等標準單元，用戶可根據需要任意選用組裝，以200 余種組裝件可以組成不同方案的柜架結構和抽屜單元。
*安全性：大量采用高強度阻燃型工程塑料組件，有效加強防護安全性能。
*技術性能高：主要參數達到當代國際水平。
*壓縮場地：三化程度高，可大大壓縮儲存和運輸預制件的場地。
2. 基本參數
電氣性能：
(1) 額定絕緣電壓 1000V 690V
(2) 額定工作電壓 690V 400V
(3) 主母線最大工作電流 6300A(IP00)
5000A(IP30)
(4) 主母線短時(IS)耐受電流 100KA(有效值)
(5) 主母線短時峰值電流 250KA(最大值)
(6) 配電母線(垂直母線)最大工作電流 1000A
(7) 配電母線(垂直母線)短時峰值電流
標準型 90KA(最大值)
加強型 130KA(最大值)
(8) 防護等級
符合IEC529、DIN40050標準
IP30、IP40
3. 開關柜及抽屜類型
3.1 動力中心柜(PC)
*采用MT、F、CW、RMW、ME等斷路器
1. GENERAL
1.1 The modular low-voltage switchgear system MNS is a type tested factory-built switchgear assembly(FBA)in accordance withIEC4391,VDE660,part 500,BS5486 part 1,UTE63-410.The cubicle used for shipping should also conbbbb to Lloyd,s Register of shipping.
The structure of MNS switchgear is of two variwties;the fixed type and the withdrawable type,its selective materials are classified as the sheet steel structure and the plastic structure,the technology of which reaches 80s,international advanced level.
MNS system are suitable for use in all installations where electrical enetgy is generated,distributed and utiliced and are widely used as disteibution system in power station 、nubbbbb power station 、shipping、oil placbbbb and other enterprises.
1.2 FEATURES
*Compact,space saving design.
*High generalization in structure design and flexibility in makeup.The Cprofiles of sheet steel with 25mm modular interval can meet the needs of all kinds of strucrural types、protetion degrees、operating and enyironmental conditions.
*Adoption of standard module design:They xan make up avariety of standard units for protection、operating、switching、controlling、regulating、measuring and indication.The user may choose at option the relevant standard unit for assembly according to requirement.
Up to more than 200of structure parts and functional modules make it possible to make up a variety of structrue frames and drawer units for sifferent schematic requirememts.
*Adoption of arge number of the high strengthy flameresisting plastic modulars and functional partirion plates are effextive to strengthen the perbbbbance of safety protection.
*High technical characteristics,main bbbbbeters reach afairly high international advanced level.
*Reduction in space requirement for storing and transporting prefabricated parts thanks to the high degree of seriation,standardization and generalization of the structrue.
2. TECHNICAL DATA
Electrical characteristics
(1) Rated insulation voltage 1000V 690V
(2) Rated operationg voltage 690V 400V
(3) Rated current of main busbar up to 6300A(IP00)
5000A(IP30)
(4) Rated short-time withstand current ofbusbar(IS)up to 100kA
(5) Rated peak withstand current of busbard up to 250kA
(6) Operating current of distribution busbars(vertical busbars)yp to 1000A(IP30)
(7) Short-time peak current of distribution busbars(vertical
busbars)Standard design up to 90kA
Reinforced design up to 130kA
(8) Protection class
Grade of protection to IEC529 or din40050 IP30.
IP40.
3. TYPE OF THE CUBICLE
3.1 Power centre(PC)cubicle

MNS型抽屜式開關設備說明書.rar